Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) Review

Customer reviews for Pyle-Pro PSTND6

Ratings
Category: Electronics
Brand: Pyle-Pro
Model: PSTND6
Availability: Available every day.
List Price : N/A
Special Prices:

         

This Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) product page made for leading anyone who looking for where to buy Pyle-Pro PSTND6 cheapest and best price in USA. You can be sure this is the best offer and great deal. Cause we have researched prices from numerous online retailers and provide the most special offer and Pyle-Pro PSTND6 huge discount for you. For more information please see it below. Read user Consumer ratings: Pyle-Pro PSTND6 Review by R. Max Church Jr. (Bowling Green, OH United States)

The price is certainly right for these brackets, but they don't work well without modification. The primary problem is the angle adjustment lock is not strong enough, with a 45 pound speaker the bracket immediately droops to the stop at the bottom, even after concentrated tightening. To fix this I drilled and added a pin at 90� but when I remounted the bracket on the wall and put the speaker back on the bracket immediately drooped again, this time to about 15� due to the inordinate amount of play in the hinge. Finally I took the brackets back off the wall and added tapered wood shims behind them to bring them back to level.

Other than the difficulties in making these hold a set angle they appear to be adequately strong enough for 45 pound speakers but I would be reluctant to put much more weight on them.

Given the low price the modifications are acceptable to me, but if you buy these you will need a handy-man's skills and tools.

Pyle-Pro PSTND6 Review by Kenneth J. Settles "ken at cbc" (colorado springs, co)

I agree, they do hang a little, as they come, but I think that could be overcome by flipping them over on the mounts (so there is no downward adjustment). I just used them as they are with approx 30# speakers. For the price, they were worth getting for me.

Pyle-Pro PSTND6 Review by albert manolio

I ordered the set of mounts, when i got them i had to tighting up nut and bolt no problem, i then had to unscrew the 2 screws on each and flip mount because evertime i put speaker on mount it woudl sag down.so i just fliped and tighted it up. I try first to just tighten down 2 screws but it is made out of a soft metal and was caving in when i tighten.I then drilled to holes , 1 on top and other on bottom, this is where i attached my 2inch global truss 0 clamp. I then attached mount to truss where speaker hung and did not move the whole party. overall for 30$ you can't exspect much. i might have a welder just weld it in one place.

Pyle-Pro PSTND6 Details

• 16.54''(L) x 4.53 ''(W) x 9.06 ''(H) - Color: Black
• Measures 13.80'' From Center ff Pole Mount to Mounting Plate
• Mount to Wall with Screws and Toggle Bolts - Maximum Load Capacity: 77 Lbs.
• Measures 13.80'' From Center Of Pole Mount To Mounting Plate
• Holds Speakers That are Equipped with Standard 35mm (1.375'') Pole Mounts - Made of Heavy Duty Welded Steel
• Item Dimensions: 18 x 3 x 10 inches; 7 pounds
• Brand: Pyle-Pro
• Model: PSTND6
• Product Type: Electronics

Full Details...

Great Deals Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) . You can Buy Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) In Stock. Buy Now Free Shipping !

              

Choose Locations:

*** Look for this products in your area by click on flgs above. ***
(United States, Canada, United Kingdom, Germany, France, Italy, Spain)

What Other Items Do Customers Buy After Viewing This Item?

• Buy Bose L1 Compact Portable Line Array System Best price! Cheapest
  Consumer Cheap Line 6 99-010-2505 with Discount video
  Product Vox JSDS Daily Sales! internet review
  

Post Tags : Buy Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) ,Pyle-Pro PSTND6 Wall Mount Speaker Bracket (Pair) On Sale, Pyle-Pro PSTND6 Lowest Price,Pyle-Pro PSTND6 Free Shipping,Pyle-Pro PSTND6 Review, Pyle-Pro PSTND6 Compare Price,Pyle-Pro PSTND6 Discount Pyle-Pro PSTND6 Coupon Code

Recent posts:

Consumer Piaa 93360 reviews
Offer LD © Kodak Compatible #10XL Bulk Set of 8 Ink Cartridges: 5 Black (8237216) & 3 Color (8946501) Low price free shipping

Dremel 290-05 Consumer Report

Consumer ratings: Dremel 290-05

Ratings
Category: Tools & Home Improvement
Brand: Dremel
Model: 290-05
Availability: In Stock
List Price : N/A
Discount: Check Special Offers !!!

Dremel 290-05 Review

Dremel 290-05 Review by Jamie R. Deem "Theophilus" (Orlando, FL)

I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.

Dremel 290-05 Review by Licari Woodworking, LLC "jimmy" (ct)

great little unit! works on all metals including saw blades and router bits. I am using the diamond tip with it. powerfull and not too loud. glad i own it.

Dremel 290-05 Review by christine l. honig

From the description, I thought that this "industrial" engraver,"Dremel 290-05", would be more powerful than the Dremel 290-01. When I ordered it, I found that it was still just a 290-01. The only difference between it and the cheaper 290-01 was that it included several additional carbide tips and came from a different source ie there is no Dremel 290-05 tool. The
description was misleading.

More Reviews...

Dremel 290-05:: Description

Stroke adjustment dial regulates engraving depth from fine lines to deep grooves; Replaceable carbide point lets you engrave on most surfaces; Letter/Number template helps etch words and numbers; Soft grip adds extra comfort and control; Light and compact design provides comfortable use for precision engraving performance; Two year warranty

Dremel 290-05 : Limited time only!

Choose Locations:

*** Look for this products in your area by click on flgs above. ***
(United States, Canada, United Kingdom, Germany, France, Italy, Spain)

Tags : Consumer ratings: Dremel 290-05 120-Volt Industrial Engraver, Dremel 290-05 Best Buy, Lowest Price, on Sale, Review, Great Deals, Free Shipping! Cheap

Recent posts:

PEET Dryer GDP-B information video
Product review

Dremel 290-05 Consumer Report

Consumer ratings: Dremel 290-05

Ratings
Category: Tools & Home Improvement
Brand: Dremel
Model: 290-05
Availability: In Stock
List Price : N/A
Discount: Check Special Offers !!!

Dremel 290-05 Review

Dremel 290-05 Review by Jamie R. Deem "Theophilus" (Orlando, FL)

I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.

Dremel 290-05 Review by Licari Woodworking, LLC "jimmy" (ct)

great little unit! works on all metals including saw blades and router bits. I am using the diamond tip with it. powerfull and not too loud. glad i own it.

Dremel 290-05 Review by christine l. honig

From the description, I thought that this "industrial" engraver,"Dremel 290-05", would be more powerful than the Dremel 290-01. When I ordered it, I found that it was still just a 290-01. The only difference between it and the cheaper 290-01 was that it included several additional carbide tips and came from a different source ie there is no Dremel 290-05 tool. The
description was misleading.

More Reviews...

Dremel 290-05:: Description

Stroke adjustment dial regulates engraving depth from fine lines to deep grooves; Replaceable carbide point lets you engrave on most surfaces; Letter/Number template helps etch words and numbers; Soft grip adds extra comfort and control; Light and compact design provides comfortable use for precision engraving performance; Two year warranty

Dremel 290-05 : Limited time only!

Choose Locations:

*** Look for this products in your area by click on flgs above. ***
(United States, Canada, United Kingdom, Germany, France, Italy, Spain)

Tags : Consumer ratings: Dremel 290-05 120-Volt Industrial Engraver, Dremel 290-05 Best Buy, Lowest Price, on Sale, Review, Great Deals, Free Shipping! Cheap

Recent posts:

PEET Dryer GDP-B information video
Product review

Seidio BD3-CRDHEV3D

Daily Sales, Buy Seidio BD3-CRDHEV3D Cheapest

You can buy it here ! Our shop offers the best thing for you here. Shop best deals of Seidio BD3-CRDHEV3D You can buy it now with special price in stock , best price Seidio BD3-CRDHEV3D for sale fast shipping in usa only and might get free shipping service.. Read more...
Seidio BD3-CRDHEV3D On Sale!


Ratings
Category: Wireless Phone Accessory
Brand: Seidio
Model: BD3-CRDHEV3D
Full name: Seidio Desktop Cradle Kit for use with HTC EVO 3D
Availability: Ships FREE within 48 hours.
List Price : N/A
Discount:

Seidio BD3-CRDHEV3D Product Reviews

Seidio BD3-CRDHEV3D Review by BayouRose

I bought this in conjunction with a compatible TPU case for my Evo 3D, and it does its job, but has its inconveniences. Placing it in the cradle is a tad awkward, as the angle seems to be ever so slightly off to line up with the charging port, but this may just be something I have to get used to. It does dock, just takes a little wiggling at first. I dislike horizontal docks as a whole, as the Android operating system does not allow for homescreen rotation, so in order to use the phone for anything, even a quick review of a contact or task, I have to remove it from the dock if I don't want to crane my neck until I can find the app that I need. Perhaps a vertical dock (if anyone makes one for a phone with a charging port on the side), or just a plain phone stand with a separate charging cord would have worked better for me. If all you want to do is stick your phone in the cradle and look at the pretty images on the dock mode (which has its own quirks), it should work fine for you.

Seidio BD3-CRDHEV3D Review by W. Ziemer (Streamwood, IL)

This works perfectly. I used this on my HTC EVO 3D w/ stock battery cover for a few months with no issues. I then decided i needed a case for my phone so i ordered the Sedio ACTIVE case and it also docked without any issue. Recently i decided to upgrade to the Seidio 4000mah battery and this cradle handled that with no problem as well. I also used to the Seidio Active Extended case with the 4000mah battery and the dock was able to handle that as well.

So long story short, this thing can handle all seidio ACTIVE cases or extended batteries without the need to buy a new dock, which is pretty amazing!

Seidio BD3-CRDHEV3D Review by Jason G. Engman "JasonZX12R" (Tampa, Florida)

I bought this dock to work with my Seidio extended battery. The dock feels very solidly built. It is also easier to get the phone into my dock then my dock for my Xoom, and for my old Epic 4G phone. It sits in a usable position, and charges fine.

The only thing keeping me from giving it 5 out of 5 is the phone does not slide super easy into the dock. There is some room for improvement. Trying to get it into the dock at night is a little challenge.

More Reviews...

Seidio BD3-CRDHEV3D:: About this product

This desktop cradle conveniently charges your phone in landscape so that you can use your HTC EVO 3D as a multimedia and music player, alarm clock, or calendar. Removable plates enable compatibility with a bare HTC EVO 3D, SURFACE (including kickstand version), SURFACE Extended, ACTIVE and ACTIVE Extended cases, and Seidio Innocell extended life batteries.

Seidio BD3-CRDHEV3D:: Technical Details

• Compatible with non-cased device, SURFACE, SURFACE Extended, ACTIVE, ACTIVE Extended cases, Seidio Innocell Extended Life Batteries
• Charge using the included micro-USB charger or travel charger
• Features a sleek, glossy finish and discreet LED light
• For use with: HTC EVO 3D
• HTC EVO 3D automatically goes into dock mode when placed inside Desktop Cradle; cradle syncs and charges horizontally for easy viewing
• Item Dimensions: 6 x 2 x 1 inches; 0 pounds
• Brand: Seidio
• Model: BD3-CRDHEV3D
• Product Type: Wireless Phone Accessory

...Read more...

Select Your Country:

*** Look for this products in your area by click on flgs above. ***
(United States, Canada, United Kingdom, Germany, France, Italy, Spain)

Seidio BD3-CRDHEV3D:Limited time offer!

What Other Items Do Customers Buy After Viewing This Item?

• Consumer NEC MC/R550A Customer reviews rates
  Consumer iPhone A1241 Review benefits
  Customer LG LG-P920 Reviews ratings
  

Tags : Buy Seidio BD3-CRDHEV3D, Best Buy Seidio BD3-CRDHEV3D Lowest Price

Recent posts:

Big Deal on Heavy Duty Stainless Steel Mixing Bowls - Set of 4
Product Lasko 2554 ratings

Dynex DX-400WPS Report

Read top consumer ratings: Dynex DX-400WPS

Ratings
Category: Personal Computers
Brand: Dynex
Model: DX-400WPS
Availability: In Stock. Ships next business day.
List Price : N/A
Discount:

Dynex DX-400WPS Consumers Report

Dynex DX-400WPS Review by HaJeKiHo

I've had this PSU for OVER A YEAR , and it works GREAT! Never had a problem with it, and Its very easy to install. PLENTY OF CONNECTORS. I am very Impressed. Makes me think all Dynex Products are like built and function this good. IT looks top of the line.

Dynex DX-400WPS Review by Mr. J. Murdock

I recently bought this Power Supply from Best Buy for $59.99. To make a long story short, it simply doesn't deliver the goods. My computer still has reboot issues. It takes a long time to browse on the internet. And to compound the problem, the Dynex 400 Watt Power Supply has an annoying loud noise emanating from my computer. I recently read an review about this product from hardware secrets which gives customers a more clear picture that they could very well be buying a lemon. Also, the instruction manual is a pain to read and clearly intended for some high level computer technician and not a common layman.

Buyer beware.

Dynex DX-400WPS Review by SkookinFL "Duncan" (Yulee, FL)

This PS costs 2X as much in Big Box stores. It runs fairly quiet and puts out plenty of current to run graphics, etc. Highly recommend.

More Reviews...

Dynex DX-400WPS:: Description

New,open box. in origonal box. box may have damage, gaurantee unit to be A-okay

Dynex DX-400WPS : Limited time only!

What Other Items Do Customers Buy After Viewing This Item?

• Weekly Sales: Panasonic KXTG4053B/K1 On Sale! cheap price
  AKG Q701(Green) Review benefits
  Customer Yamaha YSP-800SL Report reviews
  

Tags : Dynex DX-400WPS Report, Dynex DX-400WPS Best Buy, Lowest Price, on Sale, Review, Great Deals, Free Shipping! Cheap

Recent posts:

Today Sales Pointehaven Flannel-KNG-Snow-Flakes Savings
Sale a day Griffin Technology 6183-NTRPDA-2 Cheapest